A dripping faucet looks harmless, but it runs 24 hours a day. Use the calculator below to turn your drip rate into gallons per day, month and year, and an estimated cost on your water bill.
Quick answer: using the U.S. Geological Survey’s estimate of about 15,140 drips per gallon, a faucet dripping once per second wastes about 5.7 gallons a day, roughly 2,080 gallons a year. The EPA’s WaterSense program puts the same one-drip-per-second leak at more than 3,000 gallons a year, because it assumes a larger drip. Either way, a single drip adds up to thousands of gallons.
Drip Water Waste Calculator
Drip sizes follow the USGS estimates of about 1/4 mL for a faucet drip and about 1/2 mL for a tub drip. The cost starts at $11.00 per 1,000 gallons, which is about what a Dallas home pays at typical usage ($4.81 water plus $6.19 sewer, FY2026 rates). Irving runs about $11.96. For an exact number, swap in the water and sewer rates from your own bill. Results are estimates.
How Much Water Does a Dripping Faucet Waste?
Here is what common drip rates add up to for one faucet, using the USGS estimate of about 15,140 drips per gallon:
| Drip rate | Drips per minute | Gallons per day | Gallons per month | Gallons per year |
|---|---|---|---|---|
| 1 drip every 10 seconds | 6 | 0.57 | 17 | 208 |
| 1 drip every 5 seconds | 12 | 1.14 | 35 | 417 |
| 1 drip every 2 seconds | 30 | 2.85 | 87 | 1,041 |
| 1 drip per second | 60 | 5.71 | 174 | 2,083 |
| 2 drips per second | 120 | 11.41 | 347 | 4,166 |
A showerhead or tub drip is larger, roughly double the volume per drip, so those leaks waste about twice as much at the same rate. The EPA estimates a showerhead leaking 10 drips per minute wastes more than 500 gallons a year.
1 Drop Per Second Equals How Many Gallons?
One drip per second is 86,400 drips a day. At the USGS figure of about 15,140 drips per gallon, that is about 5.7 gallons a day, 174 gallons a month and roughly 2,080 gallons a year. One drip every 10 seconds, a slow leak most people ignore, still comes to about 208 gallons a year.
Why the USGS and EPA Numbers Differ
Nobody measures every drip, so every leak estimate rests on an assumed drip size. The USGS uses about 1/4 milliliter for a faucet drip. The EPA’s WaterSense program says a faucet dripping once per second can waste more than 3,000 gallons a year, which works out to a larger drip. Real drips vary with the faucet, the water pressure and how the drip forms, so treat any calculator, including this one, as a solid estimate rather than a meter reading.
How to Measure Your Drip Rate
- Count for one minute. Put a cup under the faucet and count drips for 60 seconds with a timer. That is your drips per minute.
- For slow drips, time the gap. If it drips less than about 10 times a minute, time the seconds between drips instead and use the “seconds between drips” option.
- Measure it for real. For the most accurate number, collect the water in a measuring cup for 10 minutes, then multiply. One cup is 1/16 of a gallon.
Why Faucets Drip
Most dripping faucets come down to a worn part inside the valve: a washer or O-ring on older compression faucets, a cartridge on single-handle faucets, or a worn valve seat. Hard water speeds that wear up, and much of North Texas has moderately hard water. Most faucet drips are an inexpensive repair. If the faucet itself is corroded or the parts are no longer made, replacing it is often the better value.
When the Leak Isn’t the Faucet
A drip you can see is the easy kind. If your water bill keeps climbing and you can’t find a drip, check the meter: turn off every fixture and appliance, then watch the meter’s leak indicator or dial for 15 minutes. If it moves, water is leaving somewhere you can’t see, such as a running toilet, a slab leak under the foundation, or a break in the water service line between the meter and the house.
A toilet that runs constantly can waste far more than a dripping faucet, as much as 200 gallons a day, so check the toilets before you blame the faucet.
Frequently asked questions
How many gallons does a dripping faucet waste?
It depends on the drip rate. Using the USGS estimate of about 15,140 drips per gallon, one drip per second wastes about 5.7 gallons a day and roughly 2,080 gallons a year. One drip every 10 seconds wastes about 208 gallons a year. The EPA estimates a one-drip-per-second leak at more than 3,000 gallons a year because it assumes a larger drip.
1 drop per second equals how many gallons?
One drip per second is 86,400 drips a day, which is about 5.7 gallons a day, 174 gallons a month and about 2,080 gallons a year at the USGS drip size of about 1/4 milliliter.
How much water is a drip every 10 seconds?
One drip every 10 seconds is 8,640 drips a day, about 0.57 gallons a day, 17 gallons a month and about 208 gallons a year.
How many drips are in a gallon?
The USGS estimates about 15,140 faucet drips per gallon, based on a drip of about 1/4 milliliter. Larger drips from a tub or showerhead mean fewer drips per gallon.
How much does a dripping faucet cost?
Multiply the gallons wasted by your combined water and sewer rate per 1,000 gallons, which is printed on your water bill. Enter that rate in the calculator above to see the yearly cost for your drip.
Can you fix a leaking faucet or a hidden leak in DFW?
Yes. Finish Line MEP repairs dripping faucets and running toilets and finds hidden leaks, including slab leaks and water line leaks, across Dallas–Fort Worth. You get the price before we start.
Drip turned into a bigger leak?
Finish Line MEP fixes dripping faucets, running toilets and hidden leaks across Dallas–Fort Worth, with a clear price before any work starts.
Request Leak Repair